Installation guide

TD 92679GB
12 April 2011 Ver. D
Installation Guide
Elise3
21
11 Click “Close” when the installation has finished.
The port driver “Linux USB Ethernet/RNDIS Gadget” is now installed in Control
Panel > Hardware and Sound > Devices and Printers > Device manager > Network
adapters.
4.6 Basic Configuration
Elise3 needs to be configured with basic settings. Some products settings can be set in an
installation Setup Wizard accessible from the web interface. The Setup Wizard will start
automatically the first time the module is accessed from the web browser and every time
until the configuration has been saved. Follow the wizard and fill in the required data (IP
address, NTP server, license etc.). After it has been saved the wizard can always be opened
from the start page. Other settings are set from the application’s configuration pages and
are described in the application’s Installation and Operation Manual.
For products not having a Setup Wizard, all settings are set from the products Advanced
Configuration page, see
4.6.2 Setup from the Advanced Configuration Page.
4.6.1 Setup via the Setup Wizard
1 Access the module either via the network or via the management port, see 4.5
Accessing Elise3 on page 17.
2 Enter user name “admin” and the password “changeme”.
3 Complete the Setup Wizard.
(If the module’s network IP address has not been assigned by an DHCP server, it
must be set manually in the wizard).
4 Select “Restart immediately” when the setup wizard has finished.
The module will restart with the new configuration.
4.6.2 Setup from the Advanced Configuration Page
1 Access the module either via the network or via the management port, see 4.5
Accessing Elise3 on page 17.
2 Enter user name “admin” and the password “changeme”.
3 Click “System Setup” and navigate to “Network”. Set the network parameters.
Use the online help if any problems occur.
4 Click “License” and enter the license number.
5 Set the time, see 4.6.4 Clock Synchronization and Time Settings on page 22.
6 Change the default passwords for all users. If the passwords are not changed,
anyone with knowledge of the default passwords can access the module and
change any parameter.
7 Restart Elise3. Select “Reboot” in the menu and click the “Reboot” button.