User Manual Ascom d81 DECT Handset 5.5 TD 92644GB Services Add new > Enter name > Phone call > Phone number > Enter number > Save "Contacts access" > Save Back Send data Send message > Enter prefix > Phone number > Save > Enter > Save number Clear "Contacts access" Back Back > Enter number > Save "Contacts access" > Save Back Service 1 (example) > More > Edit Delete > Yes No 26 April 2010/ Ver.
User Manual Ascom d81 DECT Handset 5.
User Manual Ascom d81 DECT Handset TD 92644GB Left > (same as Up key) Right > (same as Up key) 1.This is a system dependent feature. 2. Visible if defined in PDM/WSM. 5.
User Manual Ascom d81 DECT Handset TD 92644GB Callback Message alert > Vibrator alert > > On On if silent Off Key sound > Click Tone Silent Locks > Automatic key lock > On Off Phone lock > Auto phone lock > On On in charger Off Change PIN code Display > Screen saver > > Information Black Brightness > Normal Power save Time & Date Contrast > > Time format > 12:00(am/pm) 12:00 Date format > dd mmm yy mmm dd yyyy yyyy-mm-dd mm/dd/yyyy dd/mm/yyyy dd-mm-yyyy dd.mm.
User Manual Ascom d81 DECT Handset 5.9 TD 92644GB In Call The In Call menu can be reached during an ongoing call by pressing the middle Soft Key marked "More". Note: If configured in the PDM/IMS2, it is possible to call an emergency call while the handset/keypad is locked. During the ongoing emergency call, the In Call menu is not reachable.
User Manual Ascom d81 DECT Handset 6 TD 92644GB Calling 6.1 Incoming Call The flashing LED, accompanied by a ring signal and/or a vibrating handset, gives a notice of a call. Ring signal and vibrator can be disabled, see 8.7.1 Sound and Alert Settings on page 55. The calling party’s handset number or name is shown. The name will be shown if the calling party’s handset number is stored in the local phonebook. 6.1.
User Manual Ascom d81 DECT Handset TD 92644GB 4 Select a number. 5 Press or the soft key "Call" to dial. The number can be edited before the call is dialled. Press "More" and select "Edit number". The 25 last received, dialled or missed calls are stored in a call list. See 5.1 Calls on page 21. 6.2.4 Dial the Sender of a Message It is possible to call the sender of a message stored in the message list. 1 Open the menu by pressing the "Menu" soft key. 2 Select "Messaging" 3 Select "Inbox".
User Manual Ascom d81 DECT Handset 6.3 TD 92644GB During a Call Note: Some of these functions are system dependent. The parameters are set up in the Portable Device Manager (PDM), see Configuration Manual, Ascom d81 DECT Handset, TD 92674GB and Installation and Operational Manual Portable Device Manager (PDM), Windows version, TD 92325GB. If configured in the PDM/IMS2, it is possible to call an emergency call while the handset/ keypad is locked.
User Manual Ascom d81 DECT Handset 6.3.4 TD 92644GB Audio Transfer To transfer audio between the Bluetooth headset and the handset’s earpiece, do as follows: 1 Press "More" during the call. 2 Select "Audio transfer"1. 3 Press "Select". 6.3.5 Start a New Call during Conversation 1 Press "More" during the call. 2 Select "New Call"2. 3 Press "Select". 4 Enter the number and press 6.3.6 , or "Call". Switch between Calls Prerequisite, a new call has been started during conversation, see 6.
User Manual Ascom d81 DECT Handset 6.3.9 TD 92644GB Transfer to New Call An ongoing call can be transfered to a new number. When the new call is established, the caller that initiated the transfer will be disconnected. 1 Press "More" during the call. 2 Select "Transfer to new call"3. 3 Press "Select". 4 Enter the number to the person the ongoing call will be transfered to. 5 Press to transfer the call. 6.3.
User Manual Ascom d81 DECT Handset TD 92644GB 6.3.13 DTMF Note: If configured in the PDM/IMS2, it is possible to call an emergency call while the handset/keypad is locked. During the ongoing emergency call, the soft key "More" and the soft key "R" are disabled. 1 Press the soft key "More" during the call. 2 Select "DTMF". 3 Press "Select". This will enable the use of Dual Tone Multi Frequency (DTMF). 6.3.14 DECT Info This submenu is only visible if the Admin menu is activated.
User Manual Ascom d81 DECT Handset 7 TD 92644GB Alarm Operation The parameters described in this chapter are set in the PDM/IMS2. See Configuration Manual, Ascom d81 DECT Handset, TD 92674GB. Note: The alarm functionality is applicable for the d81 Protector only. In addition, some functions are not available when upgrading the product license from d81 Messenger to d81 Protector, or require a functionality license. See the following chapters for more information.
User Manual Ascom d81 DECT Handset TD 92644GB • information about the handset’s location is sent along with an alarm, see 7.4 Alarm with Location Information on page 38. 7.2 Man-Down and No-Movement Alarm Note: Man-down and No-movement are not available when upgrading the product license from d81 Messenger to d81 Protector. That is, only applicable for d81 Protector with the No-movement/Man-down hardware.
User Manual Ascom d81 DECT Handset TD 92644GB • the ALS (see 7.5 Acoustic Location Signal on page 38) is activated after the alarm has been sent. • information about the handset’s location is sent along with an alarm, see 7.4 Alarm with Location Information on page 38. See also 8.7.9 Alarm Settings on page 60. 7.4 Alarm with Location Information Information about the handset’s location can be sent along with an alarm. The location can be added as follows; • Manually added by the user (see 7.4.
User Manual Ascom d81 DECT Handset 8 TD 92644GB Menu Operation Calls Messaging Shortcuts Connections Services Settings Profiles Contacts Figure 5. The Main Menu 8.1 Calls 8.1.1 Call List The 25 last received, dialled or missed calls are stored in a call list. If a number occurs more than once the last time stamp, together with the total number of occurrences, is shown. Note: If supported by the system, the number’s contact name can be displayed in the call list.
User Manual Ascom d81 DECT Handset TD 92644GB 2 Select in the menu. 3 Select "Call list". 4 Step with the 5 Press "More". 6 Select "Edit number". and to select number in the list. Save Number 1 Enter the menu by pressing the “Menu” soft key. 2 Select 3 Select "Call list". 4 Step with the 5 Press "More". 6 Select "Save number". in the menu. and to select number in the list. Send Message 1 Enter the menu by pressing the “Menu” soft key. 2 Select 3 Select "Call list".
User Manual Ascom d81 DECT Handset TD 92644GB 3 Press "Select". 4 Select "Missed calls". 5 Step with the 6 Press "Call", or and to select number in the list. to call back. As in Call List there is a soft key "More" which can be used to view the time/date of the call, edit the received number, add to contacts, and delete received numbers. See 8.1.1 Call List on page 39 for information about the functionality in soft key "More".
User Manual Ascom d81 DECT Handset TD 92644GB 1 Press “Accept”, or . Default the handset will start in inverted mute and loudspeaking mode, but it can be configured differently in a PTT group. 2 Press and hold to open the microphone for transmitting. The microphone is muted again when is released. Accept Invitation Received as Message A PTT invitation received as a message is viewed the same way as an ordinary message. The message can contain up to 1000 characters. See figure 7 on page 42.
User Manual Ascom d81 DECT Handset TD 92644GB Press “Decline”, or to reject a PTT invitation. The handset will return to the previously shown screen. See also 8.1.8 Re-join a Group on page 43. Decline Invitation Received as Message Press "Reject" to reject the invitation. The handset will return to the previously shown screen. See also 8.1.8 Re-join a Group on page 43 for more information. 8.1.
User Manual Ascom d81 DECT Handset TD 92644GB 7 Enter time (HHMM) or date (MMDD) depending on the selected absence reason. 8 Press "OK". The handset sends an absence reason code to the system by establishing a call. The call will automatically be disconnected after a few seconds. Deactivate the Absence Setting 1 Enter the menu by pressing the “Menu” soft key. 2 Select 3 Select "Call services". 4 Select "Absence"6. 5 Select “Deactivate”. 6 Press "Select". in the menu.
User Manual Ascom d81 DECT Handset TD 92644GB Divert Calls When Busy 1 Enter the menu by pressing the “Menu” soft key. 2 Select 3 Select "Call services". 4 Select "Divert calls"8. 5 Select "When busy". 6 Select "Activate". 7 Enter number (maximum 24 digits) to divert to, or press the soft key the call contact list. 8 Press "OK". in the menu. to enter The handset sends a diversion reason code to the system by establishing a call.
User Manual Ascom d81 DECT Handset 8.2.1 TD 92644GB Call Contact 1 Enter the menu by pressing "Menu". 2 Select 3 Select "Call contact". 4 Select contact from the list, or enter name or number in the Search field. 5 Press "Call", or in the menu. . It is also possible to edit the contact and to send a message by selecting "View" > "More". Note that it is not possible to edit a contact indicated by a icon in front of the name. 8.2.
User Manual Ascom d81 DECT Handset 8.2.3 TD 92644GB Edit Contact Note: It is not possible to edit a company phonebook contact. The contacts are indicated by a icon in front of the name. 1 Enter the menu by pressing "Menu". 2 Select 3 Select "Edit contact". 4 Select contact. 5 Press "Edit". 6 Select "Name", "Work number", "Mobile number", "Other number", or "Ring signal". 7 Press "Edit". 8 Enter new name/number, and/or select new ring signal. 9 Press "OK". 10 Press "Save". 8.2.
User Manual Ascom d81 DECT Handset TD 92644GB Search by Number 1 Enter the menu by pressing "Menu". 2 Select 3 Select "Central phonebook". 4 Select "Search by number". 5 Enter number. 6 Press "Search". The search result is displayed. in the menu. View Last Search Result 8.3 1 Enter the menu by pressing "Menu". 2 Select 3 Select "Central phonebook". 4 Select "Last result". Only the last result will be displayed. in the menu.
User Manual Ascom d81 DECT Handset 7 TD 92644GB Press "Yes" to confirm. Edit Profile 8.4 1 Enter the menu by pressing "Menu". 2 Select 3 Select profile from list. 4 Press "More". 5 Select "Edit" from menu. 6 Select what to edit. 7 Make the changes. 8 Press "Save" to confirm. in the menu. Messaging When a text message is received, the LED starts flashing green once and the message alert signal sounds. The icon and the content of the received message are automatically displayed.
User Manual Ascom d81 DECT Handset TD 92644GB Delete Message 1 Enter the menu by pressing "Menu". 2 Select 3 Select "Inbox" to view the message list. 4 Select a message by using the 5 Press "More". 6 Select "Delete". 7 Press "Yes" to delete the message. in the menu. and on the navigation key. Forward Message 1 Enter the menu by pressing "Menu". 2 Select 3 Select "Inbox" to view the message list. 4 Select a message by using the 5 Press "View". 6 Press "More" 7 Select "Forward".
User Manual Ascom d81 DECT Handset TD 92644GB 8 Select number from the list. 9 Press "Call" Save Number 1 Enter the menu by pressing "Menu". 2 Select 3 Select "Inbox" to view the message list. 4 Select a message by using the 5 Press "View". 6 Press "More". 7 Select "Save number". 8 Select "Work Number", "Mobile number", or "Other number". 9 Press "Add". 10 Enter name. See 3.1.2 Alphanumeric Keys on page 12. 11 Press "OK". 12 Press "Save".
User Manual Ascom d81 DECT Handset TD 92644GB 1 Select "More". 2 Select "Delete" or "Delete all". 3 Select "Yes" if the unsent message(s) shall be deleted. 8.4.4 Sent Messages 1 Enter the menu by pressing "Menu". 2 Select 3 Select "Sent" to view the list. 4 Select message in the list. 5 Press "View". in the menu. Forward message 1 Press "Menu". 2 Select 3 Select "Sent" to view the list. 4 Select message in the list. 5 Press "View". 6 Enter additional text if needed.
User Manual Ascom d81 DECT Handset 8.5 TD 92644GB Services With this menu it is possible to customize your own menu with services/functions that are used often. A list of predefined services/functions are available for example; Write new message, Central phonebook, Call contact, etc. 8.5.1 1 Enter the menu by pressing "Menu". 2 Select 3 Select "Add new".
User Manual Ascom d81 DECT Handset TD 92644GB 5 Enter a name for the Soft Key. See 3.1.2 Alphanumeric Keys on page 12. 6 Press "OK". 7 Select "Function". 8 Select function from list, and press "Back". 9 Select "Value" (only for some of the functions), and press "Select". Enter a value, for example a number. Press "Back". 10 Select "Control question", and press "Select". It is off by default. Press "Back".
