User's Manual

Safety Instructions IPBS2/DB1
English 5
English
Safety Instructions
IPBS2/DB1
Read these instructions before installing the equipment.
For safe and efficient operation of the equipment, observe these
instructions and all necessary safety precautions when using the
equipment. Follow the installation instructions and adhere to all
warnings and safety precautions located on the product, and
product manuals.
Changes or modifications to the equipment not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Precautions
• Save this manual. It includes important safety information and
operating instructions. Save all instructions for future
reference.
• If local Power Supply is used for the equipment, the following
power supplies can be used:
For EU Art. No.: 130137B, Order No.: BSX-0013
For UK Art. No.: 130136B, Order No.: BSX-0014
For NA Art. No.: 130138A, Order No.: BSX-0015
For AU Art. No.: 130139B, Order No.: 660263
• Replace all guards, barriers, or fasteners. Close and secure all
openings when you complete the installation or before you
return the equipment to service.
• Install all wiring according to local, state, and federal electrical
code requirements.
• Connect AC (power supply) only to designated power sources
as marked on the product.
• Danger: Never alter the AC cord or plug. If the plug will not fit
into the outlet, have a proper outlet installed by a qualified
electrician. Improper connection increases the risk of electric
shock.
• Ensure the AC receptacle is installed near the equipment and
easily accessible.
• When mounting the equipment on a wall, use fasteners
supplied with the system.
• Position the electrical cord to the AC power supply where it is
least likely to be subjected to damage or stress.
• Remove the electrical cord from an outlet by pulling gently on
the AC adapter, not by pulling the cord.