User manual

TD 92644EN
31 October 2013 / Ver. G
User Manual
Ascom d81 DECT Handset
90
14.2.2 Easy Replacement Procedure
During the Easy Replacement procedure, the LEDs of the handset and
the charger follow the
same LED indications. This means that if the old handset has a broken display, the LED
indications on the charger and on the handset can be used to follow the replacement
procedure. Before and after easy replacement, the LEDs may have different LED indications.
For more details, see LED Indications during Easy Replacement on
page 91.
IMPORTANT: Never re
move a handset from
the charger until the instructions in the display
or the LED tells you to do so (see status on the LED if the display is broken). If there is an
error indication it may be allowed to remove the handset, see 15 Troubleshooting on page
94
for further instructions. After the old handset has been in the charger, the new handset
needs to be
placed in the charger regardless if the replacement was successful or not
. Failing
to do so may result in malfunction and the new handset will need to be sent for service.
011
New
1
23 56
4, 8 7
New
New Old
1 On the new handset, press and hold
Note: Do not release until you are instructed to do so.
2 Put the new handset in the charger.
3 When the text "Start phone replacement?" is displayed, rele
ase .
Press "Yes" (left soft key).
The text "Follow the instructions. Each step can take several mi
nutes." appears in the
display. Press "OK" (left soft key).