User manual

TD 92644EN
31 October 2013 / Ver. G
User Manual
Ascom d81 DECT Handset
71
5 The handset’s IPDI is displayed. The IPDI is a unique code that has been assigned to
the handset. Press "Next".
6 Enter System name (optional). If no system name is entered, the default name is
used. That is Syst
em A, System B etc. depending on which system name that is free.
Note: The System name might not be displayed depending on the handset’s Display
Manageme
nt Layout setting. See the handset’s Configuration Manual.
7 Press "Next".
8 Enter PARK code (max. 31 digits). The PARK code may not b
e needed if there is no
alien
DECT system within the coverage area.
9 Enter AC code. The AC code length must be between 4 - 8 digits.
10 Press "Next".
11 An information text "Protection on?" is displayed.
Select "Yes
" if the new system is to
be protected. It is not possible to delete a protected subscription from the System
menu
16
.
12 Press "OK". A searching mode starts.
Unsubscribe System
1 Enter the menu by pressing "Menu".
2 Select
in the menu.
3 Select "System".
4 Select "Unsubscribe".
5 Select the system to unsubscribe.
6 Press "Yes to unsubscribe the system.
Rename System
It is possible to change the name of the system in the handset.
1 Enter the menu by pressing the “Menu” soft key.
2 Select
in the menu.
3 Select "System".
4 Select "Rename System".
5 Select system to rename.
6 Enter new name.
7 Select "Save".
Priority
The default order of priority is the order of entered subscriptions. This me
ans that
the first
subscribed system has the highest priority. This list can be edited by the user. It is possible
to set the systems in priority by moving them up or down in the list.
NOTE: This is used in combination with
system
set to be "Automatic", see Change System on
page 70.
1 Enter the menu by pressing "Menu".
16.It is not possible to unsubscribe a protected system via the System menu. The unsubscribtion must be made via the
Admin menu or the DECT system.