User manual

TD 92644EN
31 October 2013 / Ver. G
User Manual
Ascom d81 DECT Handset
49
7.2.1 Call Contact
1 Enter the menu by pressing "Menu".
2 Select
in the menu.
3 Select "Call contact".
4 Select contact from the list, or enter name or number in the Search field.
5
Press "Call", or
.
the contact can also be edited and a message sent by selecting "View" > "More". Note that it
is not possible to edit a contact indicated by a icon
in front of the name.
7.2.2 Add Contact
Add New Contact
1 Enter the menu by pressing "Menu".
2 Select
in the menu.
3 Select "Add contact".
4 Select "New".
5 Select "Add".
6 Enter a name, see 2.1.2 Alphanumeric Keys on
page 8.
7P
ress "OK".
8 Select "Work Number", "Mobile number", or "Other number".
9 Press "Add".
10 Enter number. A tone "T" or pause "P" ca
n be in
cluded in phone numbers by
pressing
5 times or 7 times, respectively.
TIP: A variable or character U can be add
ed to the Work/Mobile/Other number field to
allow the user to enter additional numerical characters before calling the number. See
8 Procedure Call on page 74 f
or more information.
11 Press "OK".
12 Press "Save".
A specific ring signal c
an be set for each contact, s
ee 7.2.4 Set Ring Signal for a Contact on
page 50.
Add from Call List
1 Enter the menu by pressing "Menu".
2 Select
in the menu.
3 Select "Add contact".
4 Select "From call list".
5 Select number in the list.
6 Press "Add".
7 Select Work Number", "Mobile number", or "Other number".
8 Press "Add".
9 Enter name, see 2.1.2 Alphanumeric Keys on pag
e 8.
10
Press "OK".
11 Press "Save".