User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Safety Instructions
- 3 Descriptions
- 4 Menu Tree
- 5 Basic Operation
- 6 Calling
- 6.1 Open the Call List
- 6.2 Incoming Call
- 6.3 Outgoing Call
- 6.4 During a Call
- 6.4.1 Adjust the Volume during a Call
- 6.4.2 Open Contacts during the Call
- 6.4.3 Turn the Microphone on/off during a Call
- 6.4.4 Lock/Unlock the Keypad during a Call
- 6.4.5 Audio Transfer
- 6.4.6 Start a New Call during Conversation
- 6.4.7 Switch between Calls
- 6.4.8 End a Call
- 6.4.9 Transfer a Call
- 6.4.10 Transfer to New Call
- 6.4.11 Conference Call
- 6.4.12 Call Back
- 6.4.13 Call Waiting
- 6.4.14 DTMF
- 6.4.15 DECT Info
- 6.5 Loudspeaking Function
- 6.6 Call Diversion
- 7 Messaging
- 8 Alarm Operation
- 9 Menu Operation
- 10 Advanced Functions
- 11 System Handling
- 12 Troubleshooting
- 13 Operation Notice
- 14 Maintenance
- 15 Related Documents
- 16 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477GB
2009-12-08/ Ver. C
User Manual
Ascom d62 DECT Handset
65
12 Troubleshooting
This section contains information on how to solve common operational problems, and
warnings you may receive.
Go through the following lists if you encounter any problems. If this checklist does not
solve the problem, contact your system administrator.
If others have similar problems, there may be a system error.
Operational Problems
Fault Probable cause Action or comment
No display The battery level is low or the
handset is defective.
Charge the battery or contact
system administrator.
No ringing The sound off icon is on, or ringer
volume set to silent, or the
handset is defective.
Long press the Sound off key,
or increase volume, or contact
system administrator.