User manual

TD 92477GB
2009-12-08/ Ver. C
User Manual
Ascom d62 DECT Handset
51
The handset sends a diversion reason code
1
to the system by establishing a call. The call
will automatically be disconnected after a few seconds.
To stop diversion select "Deactivate" and press the confirmation button or the Soft key
"OK".
9.3 Short Cuts
Predefined functions can be set as short cuts for the Soft keys, Hot keys, Navigation keys,
and the Multifunction button. It is for example possible to define the soft key to make a
call, as a short cut to send a message or to a menu.
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on
the Navigation key.
2 Select in the menu, and press the confirmation button or the Soft key
"Select".
9.3.1 Define Soft Keys
1 Select "Soft keys".
2 Select "Left", "Middle", or "Right".
3 Press "Select" to enter a name for the Soft key.
4Press "OK".
5 Select "Function", and press "Select" to select function for the Soft key.
6 Select function from list, and press "Back".
7 Select "Value" (only for some of the functions), and press "Select". Enter a value
for example a handset number. Press "Back".
8 Select "Control question", and press "Select". It is off by default. Press "Back".
9 Press "Save".
9.3.2 Define Hot Keys
1 Select "Hot keys".
2 Select "0", "2" to "9".
3 Select "Function", and press "Select" to select function for the Soft key.
4 Select function from list, and press "Back".
5 Select "Value" (only for some of the functions), and press "Select". Enter a value
for example a handset number. Press "Back".
6 Select "Control question", and press "Select". It is off by default.
7Press "Save"
9.3.3 Define Navigation Key
1 Select "Navigation keys".
2 Select "Up", "Down", "Left", or "Right".
3 Select "Function", and press "Select" to select function for the Soft key.
4 Select function from list, and press "Back".
5 Select "Value" (only for some of the functions), and press "Select". Enter a value
for example a handset number. Press "Back".