User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Safety Instructions
- 3 Descriptions
- 4 Menu Tree
- 5 Basic Operation
- 6 Calling
- 6.1 Open the Call List
- 6.2 Incoming Call
- 6.3 Outgoing Call
- 6.4 During a Call
- 6.4.1 Adjust the Volume during a Call
- 6.4.2 Open Contacts during the Call
- 6.4.3 Turn the Microphone on/off during a Call
- 6.4.4 Lock/Unlock the Keypad during a Call
- 6.4.5 Audio Transfer
- 6.4.6 Start a New Call during Conversation
- 6.4.7 Switch between Calls
- 6.4.8 End a Call
- 6.4.9 Transfer a Call
- 6.4.10 Transfer to New Call
- 6.4.11 Conference Call
- 6.4.12 Call Back
- 6.4.13 Call Waiting
- 6.4.14 DTMF
- 6.4.15 DECT Info
- 6.5 Loudspeaking Function
- 6.6 Call Diversion
- 7 Messaging
- 8 Alarm Operation
- 9 Menu Operation
- 10 Advanced Functions
- 11 System Handling
- 12 Troubleshooting
- 13 Operation Notice
- 14 Maintenance
- 15 Related Documents
- 16 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477GB
2009-12-08/ Ver. C
User Manual
Ascom d62 DECT Handset
48
2 Press and hold the Mute button to open the microphone for transmitting. The
microphone is muted again when the Mute button is released.
Reject a PTT Invitation - Voice Style
Press to reject the PTT invitation. The handset will return to the previously shown
screen. See also Re-join a PTT Group on page 49.
Accept a PTT Invitation - Message Style
The PTT invitation is received as a message and can contain up to 1000 characters, and is
viewed the same way as an ordinary message. See figure 10.
Figure 10. Incomming PTT Invitation - Message Style
1 Press the soft key "Accept".
The handset may accept the invitation automatically, start in inverted mute and
loudspeaking mode, depending on the configuration of the received PTT invitation.
When the invitation is accepted, the following screen appears (see figure 11). The PTT
invitation can now be deleted or closed by clicking the soft key Delete or Close,
respectively. The call will not be disconnected when clicking these soft keys. The soft key
Call is used for re-joining a PTT group only, see Re-join a PTT Group on page 49.
Figure 11. Accepted PTT Invitation - Message Style
2 Press and hold the Mute button to open the microphone for transmitting. The
microphone is muted again when the Mute button is released.
12:34
Accept
Reject
010
Fire alert in
building A...
12:34
Call
Close
011
Fire alert in
building A...
Delete