User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Safety Instructions
- 3 Descriptions
- 4 Menu Tree
- 5 Basic Operation
- 6 Calling
- 6.1 Open the Call List
- 6.2 Incoming Call
- 6.3 Outgoing Call
- 6.4 During a Call
- 6.4.1 Adjust the Volume during a Call
- 6.4.2 Open Contacts during the Call
- 6.4.3 Turn the Microphone on/off during a Call
- 6.4.4 Lock/Unlock the Keypad during a Call
- 6.4.5 Audio Transfer
- 6.4.6 Start a New Call during Conversation
- 6.4.7 Switch between Calls
- 6.4.8 End a Call
- 6.4.9 Transfer a Call
- 6.4.10 Transfer to New Call
- 6.4.11 Conference Call
- 6.4.12 Call Back
- 6.4.13 Call Waiting
- 6.4.14 DTMF
- 6.4.15 DECT Info
- 6.5 Loudspeaking Function
- 6.6 Call Diversion
- 7 Messaging
- 8 Alarm Operation
- 9 Menu Operation
- 10 Advanced Functions
- 11 System Handling
- 12 Troubleshooting
- 13 Operation Notice
- 14 Maintenance
- 15 Related Documents
- 16 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477GB
2009-12-08/ Ver. C
User Manual
Ascom d62 DECT Handset
31
6.4.9 Transfer a Call
Prerequisite,
a new call has been started during conversation, see 6.4.6 Start a New Call
during Conversation on page 30.
When a caller has two ongoing calls, he/she can transfer the first call with the second call.
1 Press the soft key "More".
2 Select "Transfer"
1
.
3 Press "Select". This will connect the first call with the second call. Your call will
automatically be disconnected.
6.4.10 Transfer to New Call
An ongoing call can be transfered to a new number. When the new call is established, the
caller that initiated the transfer will be disconnected.
1 Press the soft key "More" during the call.
2 Select "Transf. to new"
2
.
3 Press "Select".
4 Enter the number to the person where the ongoing call shall be transfered to, or
press to access the phonebook.
5 Press to transfer the call. Your call will automatically be disconnected.
6.4.11 Conference Call
Prerequisite,
a new call has been started during conversation, see 6.4.6 Start a New Call
during Conversation on page 30.
By initiate a conference call, an conversation can be made between several participants
simultaneously.
1 Press the soft key "More".
2 Select "Conference"
1
.
3 Press "Select".
The person initiating the conference call is the conference leader, and the other are
participant members of the conference call.
6.4.12 Call Back
When a call is made to a busy handset, it is possible to automatically call back when the
busy handset is free. When a busy tone louds, do as follows:
1 Press the soft key "More" during the call.
2 Select "Call back"
1
.
3 Press "Select".
4 Press and wait until the handset alerts.
5 When the handset alerts, press and the call will automatically be started.
1.Only visible if defined in the PDM/IMS2
2.Only visible when the parameters "New call" and "Transfer" are defined in the PDM/IMS2.