User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Safety Instructions
- 3 Descriptions
- 4 Menu Tree
- 5 Basic Operation
- 6 Calling
- 6.1 Open the Call List
- 6.2 Incoming Call
- 6.3 Outgoing Call
- 6.4 During a Call
- 6.4.1 Adjust the Volume during a Call
- 6.4.2 Open Contacts during the Call
- 6.4.3 Turn the Microphone on/off during a Call
- 6.4.4 Lock/Unlock the Keypad during a Call
- 6.4.5 Audio Transfer
- 6.4.6 Start a New Call during Conversation
- 6.4.7 Switch between Calls
- 6.4.8 End a Call
- 6.4.9 Transfer a Call
- 6.4.10 Transfer to New Call
- 6.4.11 Conference Call
- 6.4.12 Call Back
- 6.4.13 Call Waiting
- 6.4.14 DTMF
- 6.4.15 DECT Info
- 6.5 Loudspeaking Function
- 6.6 Call Diversion
- 7 Messaging
- 8 Alarm Operation
- 9 Menu Operation
- 10 Advanced Functions
- 11 System Handling
- 12 Troubleshooting
- 13 Operation Notice
- 14 Maintenance
- 15 Related Documents
- 16 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477GB
2009-12-08/ Ver. C
User Manual
Ascom d62 DECT Handset
25
5 Basic Operation
5.1 Switch the Handset On/Off
The handset is switched off:
1 Press and hold .
When pressing the On-hook key, the handset will vibrate and the display lights up.
2 A dialog window "Switch on?" is displayed. Confirm by pressing "Yes".
The handset is in idle mode:
Note: If the handset is a shared phone, it must first be logged out to be able to switch off
the handset. See 5.2 Log a Shared Phone On/Off.
1 Press and hold .
2 A dialog window "Switch off?" is displayed. Confirm by pressing "Yes".
5.2 Log a Shared Phone On/Off
Note: This feature is license dependent and is applicable for IP-DECT systems only. See
Configuration Manual, Ascom d62 DECT Handset, TD92639GB.
The feature shared phone allows more than one user to use a handset. When a handset is
configured to be a shared phone, it can be used by any shared phone user in the system.
The message and call lists are deleted when a user logs off a handset.
Note: If configured in the PDM/IMS2, it is possible to call an emergency call from a
handset that is logged off. See Configuration Manual, Ascom d62 DECT Handset, TD
92639GB.
Log on a Handset
Prerequisite, the handset is switched on. See 5.1 Switch the Handset On/Off for more
information.
1 A dialog window "Login?" is displayed. Press the soft key "Yes".
2 Enter User ID and password.
3 Press "Login".
Log off a Handset
1 Press and hold .
2 A dialog window "Logout?" appears. Press the soft key "Yes".
5.3 Turn the Audible Signal On/Off
A long press on the or in idle mode, changes between ring signal on/off.
The icon indicates a silenced handset.