User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Safety Instructions
- 3 Descriptions
- 4 Menu Tree
- 5 Basic Operation
- 6 Calling
- 6.1 Open the Call List
- 6.2 Incoming Call
- 6.3 Outgoing Call
- 6.4 During a Call
- 6.4.1 Adjust the Volume during a Call
- 6.4.2 Open Contacts during the Call
- 6.4.3 Turn the Microphone on/off during a Call
- 6.4.4 Lock/Unlock the Keypad during a Call
- 6.4.5 Audio Transfer
- 6.4.6 Start a New Call during Conversation
- 6.4.7 Switch between Calls
- 6.4.8 End a Call
- 6.4.9 Transfer a Call
- 6.4.10 Transfer to New Call
- 6.4.11 Conference Call
- 6.4.12 Call Back
- 6.4.13 Call Waiting
- 6.4.14 DTMF
- 6.4.15 DECT Info
- 6.5 Loudspeaking Function
- 6.6 Call Diversion
- 7 Messaging
- 8 Alarm Operation
- 9 Menu Operation
- 10 Advanced Functions
- 11 System Handling
- 12 Troubleshooting
- 13 Operation Notice
- 14 Maintenance
- 15 Related Documents
- 16 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477GB
2009-12-08/ Ver. C
User Manual
Ascom d62 DECT Handset
9
The battery is fully charged within four hours. See 14.1.2 Charge the Battery on page 69.
The battery can be charged separately with a special battery charger. See 14.1.3 Charge
Spare Batteries on page 69
3.2 Chargers
3.2.1 Desktop Charger
Figure 2. Desktop chargers.
There are two desktop chargers available, one basic that will only charge the handset, and
one with advanced functionality to download new software and to synchronize
parameters. The handset is fully operational while placed in the charger.
The charger is delivered with a plug-in power supply and is connected into an ordinary
wall socket. For more information, see Installation and Operation Manual, DC4 Desktop
Charger, TD92481GB.
Note: Only use the charger within the temperature range of +5° C – +40° C.
IMPORTANT: Only use the provided power supply, see Installation and Operation
Manual, DC4 Desktop Charger, TD92481GB.
3.2.2 Rack Charger
The Rack Charger is used for charging several handsets, to synchronize parameters, and
for software download.
The built in power supply can charge up to six handsets.
See Installation and Operation Manual, CR3 Charging Rack, TD92480GB.
3.2.3 Battery Pack Charger
The Battery pack charger is used for charging up to six spare batteries.
3.3 Icons and Text in the Display
All functions and settings available to the user are shown as icons and text in the display.
The icons and text in the display indicate functions and settings to which you have access.
002
Advanced
Basic