Operation Manual

TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
89
A.8 Messaging
When a text message is received a beep sounds in the Bluetooth headset.
A.9 Transfer a call
A.9.1 Transfer a Call to the handset
To transfer a call to the handset from the Bluetooth headset, press the soft key "More" on
the handset during the call, and select “Audio transfer”.
A.9.2 Transfer a Call to the Bluetooth Headset
To transfer the call to the Bluetooth headset, press the soft key "More" on the handset
during the call, and select “Audio transfer”.
It is also possible to transfer a call to the Bluetooth headset by pressing the button
1
on the
Bluetooth headset.
A.10 Switch to a Headset with Cord
If a headset with a cord is connected during a call, the call is transferred to this headset
automatically.
A.11 Menu Tree
See 4.8 Settings on page 23.
A.12 Operation Notice
A.12.1 Accessibility and Voice quality
Bluetooth uses the frequency of 2.45 GHz. WLAN, microwave oven, and other devices that
use the same frequency can disturb the use of a Bluetooth headset.
A.12.2 Operation Area
Maximum distance between the headset and the handset is 10 metres. The communication
distance between the handset and headset may vary considerably due to the environment
and disturbances from other 2.45 GHz equipment. Different headsets can also give different
communication distances.
A.12.3 Out of Range
If a connection cannot be made with the selected Bluetooth headset the call is transferred
automatically to the handset.
If the Bluetooth headset and the handset get out of range from each other the connection is
temporarily lost. Since the last connected headset is always considered "selected", the
connection is automatically established again when a call is made or received.