Operation Manual

TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
88
When a new headset has been selected any previous headset will automatically become
disconnected.
A.5.5 Remove a Headset
To remove a Bluetooth Headset enter in the handset menu, select "Bluetooth" >
"Headset". Step with the navigation key, or to the headset to be removed and press the
soft key "More". Select "Delete". Confirm with the soft key "Yes".
A.5.6 Change the name of Bluetooth headset
The name, in the headset list, of the headset is the default name for the headset.
To change the name enter in the menu, select “Bluetooth” > “Headset”. Step with the
navigation key, or , select the headset. Select "More" > “Edit name”. See 3.5
Alphanumeric Keys on page 16.
A.6 Calling
A.6.1 Make a Call
Dial the number on the handset and press the soft key "Call", or the Off-hook key. When
“Transfer call to phone?” is displayed press "No" or ignore the message to use the Bluetooth
Headset. Press "Yes" to use the handset.
A.6.2 Answer a Call
A ring signal sounds in both the selected Bluetooth headset and the handset to signal an
incoming call.
To answer the call in the Bluetooth headset, press the button
1
on the headset.
To answer the call in the handset press the Off-hook key on the handset.
A.6.3 End a Call
To end the call press the button
1
on the headset or the On-hook key on the handset.
A.7 Volume/Mute Control
A.7.1 Adjust the Volume During a Call
Depending on the Bluetooth headset it might be possible to adjust the volume on the
headset*. On the handset press the upper Volume button on the upper left side to increase
the volume and the lower Volume button to decrease the volume in the headset.
A.7.2 Turn the Microphone On/Off During a Call
Mute the headset and the handset with the Sound off key on the handset. See 6.4.3 Turn
the Microphone on/off during a Call on page 29.
1. For instruction, see headset manual.