Operation Manual

TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
87
A.4 Headsets
A number of Bluetooth headsets for different work situations have been tested together
with the handset. Refer to the Ascom Wireless Extranet Website for a list of verified
Bluetooth headsets.
Since the Bluetooth supports the Bluetooth 2.0 standard, other headsets may also work
although not verified by Ascom.
Note: The Bluetooth headset may have more or less functions than described here, refer to
the Manual for the Bluetooth headset.
A.5 Operation
Step between the menus with the navigation key . Confirm each menu selection by
pressing the Soft key "Select".
A.5.1 Enable Bluetooth
To enable the Bluetooth function enter in the handset menu, select Bluetooth and
select “Enable”.
A.5.2 Pair and Connect a Bluetooth Headset
Before a headset can be used a connection (pairing) between the headset and the handset
must be established.
1 Place the Bluetooth headset and the handset next to each other.
2 Enable Bluetooth, see A.5.1 Enable Bluetooth.
3 Put the Bluetooth headset in pairing mode, see the user manual for the Bluetooth
headset.
4 On the handset enter in the menu, select “Bluetooth” > “Headset”, “Add new”.
A dialog "Put headset in Pairing mode" is displayed.
5 Press "OK". It will now search for a Bluetooth headset for connection.
6 When headset is found, press "Pair".
7 If needed, enter PIN code, see user manual for the Bluetooth headset. Press "OK".
The dialog Successful pairing appears if the pairing process was successful. The
Bluetooth headset will also be connected indicated by the icon in front of the
headset.
A.5.3 Add another Bluetooth Headset
Up to four headsets can be paired to the handset, but only one at a time can be selected. To
pair another headset repeat section “Pair and Connect a headset” steps 1-6.
The paired headsets are displayed by a default name in the handset menu “Headset”. See
A.5.6 Change the name of Bluetooth headset
A.5.4 Select a Bluetooth Headset
To activate a Bluetooth headset, enter in the handset menu, select “Bluetooth” >
“Headset”. Step with the navigation key, or to the headset to be selected and press the
soft key "Select", "Connection successful" is displayed. The headset is now selected.