Operation Manual

TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
79
Figure 14. Easy replaceable battery, unlock the lid and remove the battery.
16.2 Easy Replacement of Handset
Easy replacement can be used if a handset needs to be replaced due to, for example, a
broken display. The easy replacement procedure is done via the handset display and the DC4
Advanced Desktop Charger, or the CR3 Rack Charger.
The following settings are replaced during easy replacement:
•DECT registration
• User parameters (including User ID)
•Contacts
• The extension number is assigned to the new handset.
The following settings are not replaced during the easy replacement:
• Call list
• Messages
• Bluetooth pairing list
•License(s)
1
16.2.1 Before Starting Easy Replacement Procedure
1 Check that both the old handset (that is, the handset to be replaced) and the new
handset (that is, the replacement handset) are of the same device type (d62).
NOTE: It is possible to perform Easy Replacement between different product licenses (that is;
Talker, Messenger, and Protector). The new handset’s product license is not replaced by the
old handset’s product license during the procedure
1
.
2 Check that the software of d62 is of version 2.8.19 or greater, by entering *#34# in
idle mode.
3 Check that the software of CR3 Rack Charger and/or DC4 Advanced Desktop Charger,
is of version 1.3.x or greater, by using the PDM. For more information on how to use
the PDM, see Installation and Operational Manual, Portable Device Manager (PDM),
Windows version, TD 92325EN.
4 Make sure that the handset batteries are charged before starting the easy
replacement procedure.
5 Switch off the new handset by long pressing .
1. A handset’s product license, for example d62 Messenger, and/or license dependent functions can be moved to another
handset using PDM/IMS3.