Operation Manual

TD 92477EN

15 June 2012 / Ver. G

User Manual

Ascom d62 DECT Handset

3 Select “Information”, or “Black”. Time and status information will be displayed when

"Information" is selected, and the display will turn off when the handset is not used.

4 Press "Back".

NOTE: When charging the handset and the screen saver is shown, no missed calls/incoming

messages will be indicated in the display. Only the Talker/Messenger/Protector shield is

displayed.

Brightness

1 Select “Display”.

2 Select “Brightness”.

3 Select “Normal” or “Power save”.

4 Press "Back".

Contrast

1 Select “Display”.

2 Select “Contrast”.

3 Increase/decrease the contrast by pressing and on the Navigation key.

4Press "OK".

5Press "Back"

9.8.4 Time & Date Settings

The time and date are received from the DECT system. If the time and date are changed in

the system, it takes up to 24 hours before the changes appear in the handset. If the handset

is turned off and then turned on, the changes will be applied immediately. However, it is

possible to change the format of the time and date.

Set Time Format

1 Select "Time & Date" and press "Select".

2 Select Time format. The actual time format will be displayed. Selectable time format:

• 12:00 (AM/PM)

• 24:00

3 Press "Select" to save the setting.

Set Date Format

1 Select “Time & Date” and press "Select".

2 Select “Date format”, press "Select". Selectable date format:

• DD/MM/YYYY, for example, 17/09/2009 (also called Europe)

• MM/DD/YYYY, for example, 9/17/2009 (also called US)

• YYYY-MM-DD, for example, 2009-09-17 (ISO 8601)

• MMM DD YYYY, for example, Sep 17 2009

• DD MMM YY, for example, 17 Sep 09

• DD.MM.YYYY, for example, 17.09.2009