Operation Manual

TD 92477EN

15 June 2012 / Ver. G

User Manual

Ascom d62 DECT Handset

9.8.2 Phone Lock settings

Activate the Automatic Key lock

1 Select “Locks”.

2 Select "Automatic key lock".

3 Select "On" for activation of automatic key lock.

Note: It is possible to answer/close an incoming call and/or press the alarm button while the

keypad is locked. If configured in the PDM/IMS3, it is also possible to call an emergency call

while the keypad is locked. See Configuration Manual, Ascom d62 DECT Handset, TD

92639GB.

Activate the Phone Lock

The handset can be protected for unauthorized use. If this function is activated a PIN code

has to be entered at power on, or when the handset is placed in a charger - this behaviour

will first be activated when the handset is placed in the charger. The default phone lock code

(0000) can be changed to any 4 -8 digit personalized code.

Note: If configured in the PDM/IMS3, it is possible to call an emergency call while the

handset is locked. See Configuration Manual, Ascom d62 DECT Handset, TD 92639GB.

1 Select “Locks”.

2 Select “Auto phone lock”.

3 Select “On”, or "On in charger".

4Enter PIN code

5Press "OK".

If the PIN code is forgotten it can be removed by your distributor.

Deactivate the Phone Lock

1 Select “Locks”.

2 Select “Auto phone lock”.

3 Select “Off”.

4Enter PIN code

5Press "OK".

Change PIN Code

1 Select "Change PIN code".

2 Enter the old PIN code.

3Press "OK".

4 Enter new PIN code twice.

5 Press "Save".

9.8.3 Display Settings

Screen Saver

1 Select “Display”.

2 Select “Screen saver”.