Operation Manual

TD 92477EN

15 June 2012 / Ver. G

User Manual

Ascom d62 DECT Handset

Set different Ring Signals for Calls

1 Select “Sound & Alerts”.

2 Select “Ring signals”.

Different signals for internal calls, external calls and call back can be set.

3 Select "Internal call", "External call", "Callback" or "PTT". The handset has 14 different

ring signals.

4 Select sound. By pressing "Play" it is possible to listen to the different sounds.

NIOTE: Additional ring signals might be selectable if them are configured via PDM. See the

handset’s Configuration Manual for more information.

5 Press "Back".

Set Alerts for Messages

1 Select “Message alert”. Different message alerts can be selected. The handset has 8

different message alerts (default), see 4.8 Settings on page 23.

2 Select message alert from list. By pressing "Play" it is possible to listen to the

different sounds.

TIP: The option Custom sounds should be selected you want to create an own

message alert. See the handset’s Configuration Manual for more information.

NOTE: The "Play" soft key is not available for Enhanced beep and Custom sound.

Instead, send a message to the handset to listen to the sound.

3 Press "Back".

TIP: By default, the message volume follows the ring volume setting, but it is possible to set

another message volume in the handset, see Configuration Manual, Ascom d62 DECT

Handset, TD 92639EN.

Turn the Vibrator on/off

If the vibrator is activated, it will vibrate at incoming call and message. In addition, it is

possible to activate the vibrator when receiving a message during a call. See the

Configuration Manual, Ascom d62 DECT Handset, TD 92639EN for more information.

1 Select “Vibrator alert”. Choose between “On”, “On if silent” (that is, the vibrator is on

when the handset is muted), or “Off”.

2 Select vibrating alert.

3 Press "Back".

Set the Key Sound

This means that every time a key is used, the handset gives a small sound.

1 Select “Key sound”. Choose between “Silent, “Click”, or “Tone”.

2 Select key sound.

3 Press "Back".

It is possible to listen to the key sound by pressing the soft key "Play".