Operation Manual
TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
60
9.6 Profiles
It is possible to set up an own profile for incoming calls, message alerts, message volume,
vibrating alerts, key sound etc. This can be useful when there are many users on the same
handset, and they want different sound profiles. It can also be used for temporarily settings,
for example while in a meeting incoming calls should be silent. It is easy to switch between
the different profiles.
If no profile is selected, the normal settings are is used.
Note: The settings in a profile can be superseded if the corresponding settings in a system
profile
1
are activated. When the system profile is activated, its settings is not displayed in
the handset menu. However, it is possible to display when a system profile is activated in
the handset. See 11 System Profiles on page 70.
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select in the menu.
Add New Profile
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select in the menu.
3 Select "Add new".
4 Enter name of the profile.
5 Press "Save".
6 Press "More" and then select "Add setting".
7 Select the setting you want to add to the profile.
Repeat steps 6-7 if you want to add additional settings.
8 Mark the wanted setting and press "Edit" to make the changes.
It is also possible to create a new profile based on another profile by do the following:
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select in the menu.
3 Select "Add new".
4 Enter name of the profile.
5 Press "Save"
6 Press "More" and then select "Import from".
7 Select the profile which settings to be used for the new profile.
8 If needed, press "More" and then select corresponding option to add/import
additional settings or remove settings.
Activate Profile
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
1.This feature is applicable for d62 Messenger and d62 Protector only.