Operation Manual

TD 92477EN

15 June 2012 / Ver. G

User Manual

Ascom d62 DECT Handset

9.3.3 Define Navigation Key

1 Select "Navigation keys".

2 Select "Up", "Down", "Left", or "Right".

3 Select "Function", and press "Select" to select function for the Soft key.

4 Select function from list, and press "Back".

5 Select "Value" (only for some of the functions), and press "Select". Enter a value for

example a handset number. Press "Back".

6 Select "Control question", and press "Select". It is off by default.

7 Press "Save".

9.3.4 Define Multifunction

The Multifunction button can be defined with two different functions, a long press activates

one function, and a double press activates another function.

1 Select "Multi-function button"

2 Select "Long press", or "Multi press".

3 Select "Function", and press "Select" to select function.

4 Select function from list, and press "Select" and then press "Back".

5 Select "Value" (only for some of the functions), and press "Select". Enter a value for

example a handset number. Press "Back".

6 Select "Control question", and press "Select". It is off by default.

7 Press "Save".

9.4 Services

With this menu it is possible to customize your own menu with functions that are used

often. A list of predefined functions are available for example, Write new message, Central

phonebook, Call contact, etc.

Tip: If configuring the Phone call function, it is possible to add a variable/character U in the

Enter number field that allows the user to enter additional numerical characters before

calling the number. See 10 Procedure Call on page 69 for more information.

1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the

Navigation key.

2 Select in the menu, and press the confirmation button or the Soft key "Select".

9.4.1 Add Services

1 Select "Add new".

2 Enter a name of the service in the field, and then press "OK"

3 Mark a function by using the and on the navigation key.

4 Press "Select", or the confirmation button.

5 If necessary

, enter values in the fields (only applicable for some of the functions)

6 Press "Back".

1.Multifunction button is applicable for d62 Talker/d62 Messenger only.