Operation Manual

TD 92477EN

15 June 2012 / Ver. G

User Manual

Ascom d62 DECT Handset

Divert Calls When Busy

1 Select "When busy".

2 Select "Activate".

3 Enter number (maximum 24 digits) to divert to, or press the soft key to open

the phonebook.

4Press "OK"

The handset sends a diversion reason code

to the system by establishing a call. The call will

automatically be disconnected after a few seconds.

To stop diversion select "Deactivate" and press the confirmation button or the Soft key "OK".

9.3 Short Cuts

Predefined functions can be set as short cuts for the Soft keys, Hot keys, Navigation keys,

and the Multifunction button. It is for example possible to define the soft key to make a call,

as a short cut to send a message or to a menu.

Tip: If creating a short cut to the Phone call function, it is possible to add a variable/

character U in the Enter number field that allows the user to enter additional numerical

characters before calling the number. See 10 Procedure Call on page 69 for more

information.

1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the

Navigation key.

2 Select in the menu, and press the confirmation button or the Soft key "Select".

9.3.1 Define Soft Keys

1 Select "Soft keys".

2 Select "Left", "Middle", or "Right".

3 Press "Select" to enter a name for the Soft key.

4Press "OK".

5 Select "Function", and press "Select" to select function for the Soft key.

6 Select function from list, and press "Back".

7 Select "Value" (only for some of the functions), and press "Select". Enter a value for

example a handset number. Press "Back".

8 Select "Control question", and press "Select". It is off by default. Press "Back".

9 Press "Save".

9.3.2 Define Hot Keys

1 Select "Hot keys".

2 Select "0", "2" to "9".

3 Select "Function", and press "Select" to select function for the Soft key.

4 Select function from list, and press "Back".

5 Select "Value" (only for some of the functions), and press "Select". Enter a value for

example a handset number. Press "Back".

6 Select "Control question", and press "Select". It is off by default.

7 Press "Save"