Operation Manual

TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
48
9.1.5 In Charger Action when not in Call
It is possible to determine actions to be performed when a handset is not in call and placed
in charger.
Note: Additional In charger actions can also be configured, see Configuration Manual, Ascom
d62 DECT Handset, TD 92639EN.
1 Select “In charger”.
2 Select "Other actions".
3 Select one of the following:
• No action - no action will be performed when handset is not in call and placed in
charger.
• Change profile - when the handset is placed in the charger it will change profile.
When the handset is removed from the charger, the profile is changed back.
Press "Edit" and select the wanted profile. By default only the profile Normal is
selectable, but additional profiles will be visible if they are configured. See 9.6
Profiles on page 60.
•Switch off
1
- When the handset is placed in the charger it will switch off. When it
is removed from the charger it will switch on again.
• Sound off
1
- When the handset is placed in the charger it will be muted. When it
is removed from the charger it will switch on the sound again.
• Logout - When the handset is placed in a charger it will be logged off. Call list and
message list will be deleted when the handset is logged out. When it is removed
from the charger, the user needs to log on again. Note: This feature is license
dependent and applicable in IP-DECT systems only. See also 5.2 Log a Shared
Phone On/Off on page 25.
• Message absence - When an application/system sends a message to a handset, it
will receive an indication that the handset is absent. If a handset is absent, the
application/system determines if the message shall be sent to the handset or not,
or redirected to another handset.
NOTE: If a message is sent from a handset, it will not receive an indication that the
recipient is absent. This function must be programmed in the PBX to be able to
redirect calls/messages.
9.2 Calls
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select in the menu, and press the confirmation button or the Soft key "Select".
9.2.1 Call List
The 25 last received, dialled or missed calls are stored in a call list. If a number occurs more
than once the last time stamp, together with the total number of occurrences, is shown.
NOTE: If supported by the system, the number’s contact name can be displayed in the call
list.
1.If handset restrictions are enabled in PDM, the handset might not be switched off/silenced when placed in charger.