Operation Manual

TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
32
6.4.11 Conference Call
Prerequisite,
a new call has been started during conversation, see 6.4.6 Start a New Call
during Conversation on page 30.
By initiate a conference call, an conversation can be made between several participants
simultaneously.
1 Press the soft key "More".
2 Select "Conference"
1
.
3 Press "Select".
The person initiating the conference call is the conference leader, and the other are
participant members of the conference call.
6.4.12 Call Back
When a call is made to a busy handset, it is possible to automatically call back when the
busy handset is free. When a busy tone louds, do as follows:
1 Press the soft key "More" during the call.
2 Select "Call back"
1
.
3 Press "Select".
4 Press and wait until the handset alerts.
5 When the handset alerts, press and the call will automatically be started.
6.4.13 Call Waiting
During a call and the line is busy, do as follows:
1 Press the soft key "More".
2 Select "Call waiting"
1
.
3 Press "Select". The other part will get a "Call waiting" signal.
When the line is free it will automatically call the number again. This is system dependent.
6.4.14 Answering a second call during a call
If a second caller calls during a phone call, the handset will beep and display the text
"Incoming call" and the name or phone number of the second caller. To answer the second
caller:
1 Press the soft key "Accept".
The text "Switch" briefly appears on screen, and the handset transfers to the second
call. The first call is put on hold.
2 When finished speaking with the first caller, select the "More" soft key.
3 Select "End Call".
The second call is closed and the first call is retrieved.
NOTE: It is possible to reject a second call by pressing the Decline soft key instead of the
Accept key. The second caller will hear a busy tone, and the call will be logged as a rejected
call in the handset.
1.Visible if configured in the handset, see the Configuration Manual for more information.