Operation Manual

TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
31
6.4.7 Switch between Calls
Prerequisite,
a new call has been started during conversation, see 6.4.6 Start a New Call
during Conversation on page 30.
1 Press the soft key "More".
2 Select "Switch"
1
.
3 Press "Select". This will switch between the calls.
6.4.8 End a Call
Prerequisite,
a new call has been started during conversation, see 6.4.6 Start a New Call
during Conversation on page 30.
1 Press the soft key "More" during the call.
2 Select "End Call".
1
3 Press "Select". This will end the current call and the previous call is resumed.
6.4.9 Transfer a Call
Prerequisite,
a new call has been started during conversation, see 6.4.6 Start a New Call
during Conversation on page 30.
When a caller has two ongoing calls, he/she can transfer the first call with the second call.
1 Press the soft key "More".
2 Select "Transfer"
1
.
3 Press "Select". This will connect the first call with the second call. Your call will
automatically be disconnected.
6.4.10 Transfer to New Call
An ongoing call can be transferred to a new number. When the new call is established, the
caller that initiated the transfer will be disconnected.
1 Press the soft key "More" during the call.
2 Select "Transf. to new"
2
.
3 Press "Select".
4 Enter the number to the person where the ongoing call shall be transfered to, or
press to access the phonebook.
5 Press to transfer the call. Your call will automatically be disconnected.
1.Visible if configured in the handset, see the Configuration Manual for more information.
2.Only visible when the parameters "New call" and "Transfer" are defined in the handset. See the Configuration Manual for
more information.