Operation Manual

TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
28
6.3.2 Post-Dial with Headset Button
If a headset is used, it is possible to press its button
1
to get a dial tone and then enter the
number to be dialed.
6.3.3 Dial Using a Pre-programmed Navigation/Hot/Soft Key, Multifunction button, or
Headset Button
Note: The Multifunction button is applicable for d62 Talker and d62 Messenger only.
A Navigation key
2
, Hot key
2
, Soft key
2
, Multifunction button
2
or headset button
1
can be
programmed with a handset number. Press the pre-programmed key/button to dial the
number. The call will automatically be connected.
6.3.4 Dial a Number from the Call list
1Press .
2 Select a number press or soft key "Call" to dial. The number can be edited before
the call is started. Press "More" and select "Edit number".
6.3.5 Dial Last Called Number with Headset Button
If a headset is used, it is possible to press its button
1
to dial the last called number.
6.3.6 Dial the sender of a Message
You can call the sender of a message stored in the message list, from the Messaging menu.
1 Open the menu by pressing the confirmation button, or the soft key "Menu".
2 Select "Messaging".
3 Select "Inbox".
4 Select message from the list.
5 Select "View".
6 Select "More".
7 Select "Call sender".
6.3.7 Dial a Number from the Local Phonebook
1 Open the menu by pressing the confirmation button, or the soft key "Menu".
2 Select "Contacts".
3 Select "Call contact".
4 Select contact from list, or search name/number by entering characters in the
"Search" field.
5 Press the Soft key "Call" or the Off-hook key to make the call.
6.3.8 Dial a Name from the Central Phonebook
1 Open the menu by pressing the confirmation button, or the soft key "Menu".
2 Select “Contacts”.
3 Select "Central phonebook".
1.The headset button must be configured int the PDM/IMS3.
2.See 4.6 Short cuts on page 21 for more information how to configure the key.