Operation Manual

TD 92477EN

15 June 2012 / Ver. G

User Manual

Ascom d62 DECT Handset

5 Basic Operation

5.1 Switch the Handset On/Off

Switch on the Handset

Press and hold . When pressing , the handset will vibrate and the display lights up.

Switch off the Handset

Prerequisite: The handset is in idle mode:

Tip: While in a menu, press to return to idle mode. If the handset is a shared phone, it

must first be logged out to be able to switch off the handset. See 5.2 Log a Shared Phone

On/Off. It is possible to prevent a user to switch off the handset by enabling the parameter

Prevent switch off in PDM.

1Press and hold .

2 A dialog window "Switch off?" is displayed. Confirm by pressing "Yes".

Note: If the parameter Prevent switch off is enabled, it is not possible to switch off the

handset. See Configuration Manual, Ascom d62 DECT Handset, TD 92639EN.

5.2 Log a Shared Phone On/Off

NOTE: Shared phone is a license dependent feature and is applicable for IP-DECT systems

only. See Configuration Manual, Ascom d62 DECT Handset, TD92639GB.

The feature shared phone allows more than one user to use a handset. When a handset is

configured to be a shared phone, it can be used by any shared phone user in the system. The

message and call lists are deleted when a user logs off a handset.

NOTE: If configured in the PDM/IMS3, it is possible to call an emergency call from a handset

that is logged off. See Configuration Manual, Ascom d62 DECT Handset, TD 92639GB.

Log on a Handset

Prerequisite, the handset is switched on. See 5.1 Switch the Handset On/Off for more

information.

1 A dialog window "Login?" is displayed. Press the soft key "Yes".

2 Enter User ID and password.

3Press "Login".

Log off a Handset

1Press and hold .

2 A dialog window "Logout?" appears. Press the soft key "Yes".

5.3 Turn the Audible Signal On/Off

Note: If handset restrictions are enabled, you might not be able to turn off the audible

signal. See Configuration Manual, Ascom d62 DECT Handset, TD 92639EN.

A long press on the or in idle mode, changes between ring signal on/off.