Operation Manual

TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
24
4.9 In Call
The In Call menu can be accessed during an ongoing call by pressing the soft key "More".
If configured in the PDM/IMS3, it is possible to access a certain function in the In call menu
directly by pressing the left Soft key or right Soft key.
The In call function can be used in combination with the Procedure call function, see 10
Procedure Call on page 69.
Note: If the handset is configured via PDM/IMS3, it is possible to call a pre-defined
emergency number while the handset is locked or the keypad is locked. If calling the
emergency number from a locked handset, it is only possible to access the Microphone on/
off function in the In Call menu. However, the entire In call menu is accessible when calling
the emergency number from a handset with locked keypad.
4.9.1 Additional In Call Functions
Besides the default In Call functions, it is possible to define 10 extra system specific codes/
general purposes. See Configuration Manual, Ascom d62 DECT Handset, TD 92639EN.
4.10 Customizing the Menu Tree
The menu tree can be customized by hiding some of the functions that are available but for
example not in use. Which functions that should be hidden are defined in the PDM. See
Configuration Manual, Ascom d62 DECT Handset, TD92639GB.
• Call back*
• DECT info****
• Audio transfer**
• End call*
• Call waiting*
• Switch*
• Transfer*
• Transfer to new call***
>
• New call*
• “Phonebook access”
• Call
—>
>
>
• Conference*
—>
>
>
>
• Cancel
• “Phonebook access”
• Call
• Cancel
• Contacts*
• Microphone on/off
• DTMF*
>
>
>
• General purpose 1 -10 *
*) Visible if enabled/defined in the PDM/IMS3.
**) Only available when Bluetooth connection is active.
***) Only visible when the parameters "New call" and "Transfer" are defined in the PDM/IMS3.
****) Only visible if the Admin menu is activated.
>
—>
• System
• Link