User guide

59
20BA312004/A0_en
General information
Troubleshooting
Most malfunctions will not be due to a defect on your telephone. You can often save
time and money by correcting minor faults yourself.
The following tips are intended to help you do this.
Symptom Cause Remedy
No display Handset not switched on Press Connect key
Battery cells Charge handset / battery
cells, see page 10
No radio link to Handset not registered Register handset.
the base station See page 28
Cannot get a line, Telephone connector plug Check the plug at both the
no dial tone not correctly inserted telephone socket and the
base station, if necessary
remove and reconnect.
Mains transformer plug Check the plug at both the
not correctly inserted 230V socket and the base
station, if necessary remove
and reconnect. See page 8.
Handset and/or base Ringing signal de-activated Adjust volume of ringing
station not ringing or set too low signal. See page 13.
On PBXs only: EIC not entered. Enter EIC.
No connection or wrong See page 52.
number when dialling
from speed-dial memory
No connection made Using the wrong dialling Switch to other dialling
after dialling, dial tone method method. See page 12.
still audible
Remote access not No remote access PIN Enter PIN.
working entered See page 47.
Answering machine not Memory full Delete messages.
recording messages See page 39 + 42
Answering machine set to Set "Record Messages"
"Answer Only" operating operating mode.
mode See page 38.