User guide

58
20BA312004/A0_en
System settings
Resetting the base station to the
default settings
Code 250
This procedure resets the following features
to their default settings:
– Dialling method (code 038)
– Base station ringing tone (3/6/✻)
– Exchange identification code (code 253)
– Room monitoring disabled (code 770)
– Provider dialling deactivated (code 080)
– Dial pause 3 seconds (code 023)
– Exchange line "ON" (code 961)
Plus, on the Ascom Avena 122/Ascom
Avena 122 plus with answering machine:
– Announcement texts
– Messages received
– Messages limited to 120 s (code 742)
– Protected remote access "OFF"
– Remote access PIN "OFF" (0000)
– Number of rings automatic (code 730)
– Monitoring "OFF" (code 710)
– Short recording time (code 781)
– Announcement text answering machine
– Received messages answering machine
The handsets remain registered.
Deleting all the one-touch
memories
Code 251
This procedure deletes all the one-touch
memories.
Deleting the exchange
identification code
Code 253
This procedure resets the exchange
identification code.
Resetting the handset to the
default settings
Code 260
This procedure resets the following features
to their default settings:
– Offhook answering "OFF" (code 930)
– Keyclick "ON" (code 911)
– Handset ringing tone (3/6/✻)
– Range warning tone "ON" (code 920)
– Battery type NiCd (code 042)
– Charge tone "ON" (code 951)
– Automatic base station selection
(code 904)