User guide

53
20BA312004/A0_en
Operating the answering machine by remote access
Carrying out room monitoring
This feature enables you to monitor, from
a distance, the area around your answering
machine for noise.
Remote room monitoring is possible only
if the remote access PIN is not on "0000"
and the basic setting "Enable room moni-
toring" is activated (see page 27).
You are connected with the answering
machine:
]
The microphone on the base
station is switched on for 30
seconds.
After 30 seconds you will hear a warning
tone, which you can acknowledge by
pressing numeric key 6 to prolong room
monitoring by a further 30 seconds.
Otherwise the line will be disconnected
after approx. 9 seconds.
During room monitoring the connection
indicator on the base station flashes.
Note:
By pressing numeric key 6 you can prolong
room monitoring again by 30 seconds.
Ending room monitoring:
Put the receiver down.
or
You can end the room monitoring by
pressing numeric key 2.
To record greeting message B
‹
You hear the Record tone.
After the beep tone speak the text
of your greeting message... (min. 5
seconds, max. 3 minutes. Speak
without making long pauses
between words (max. 4 seconds) as
otherwise the recording will be
ended.
”
This completes the recording
procedure. The text you have just
spoken is now played back for you
to check.
Deleting the greeting message
You are connected with your answering
machine. The answering machine is
switched off.
Ú
You will hear the warning tone for
3 seconds.
To delete greeting message A, press
È
The greeting message is now
deleted.
or
to delete greeting message B, press
‹
The greeting message is now
deleted.