User guide

51
20BA312004/A0_en
Operating the answering machine by remote access
It is now impossible to remote access your
equipment until the PIN alarm has been
cancelled by pressing the ON/OFF key on
the base station.
Switching on the answering
machine
If you have forgotten to switch on your
answering machine, you can switch it on
remotely.
Dial your number.
After 10 to 11 ringing signals the answer-
ing machine will switch itself on for 8 sec-
onds without playing a greeting.
Enter your remote access PIN.
You hear the standby tone.
⁄
The greeting message is played
back (monitoring).
Put down the receiver
or
press the numeric key of the function you
want to proceed with.
Note:
This function cannot be carried out if no
remote access PIN is entered.
Switching the answering machine
on/off
You are connected with your answering
machine:You are connected with your an-
swering machine:
To switch off:
⁄
The greeting message is not played
back. The answering machine is
switched off.
or
To switch on:
⁄
The greeting message is played
back (monitoring). The answering
machine is switched on.
Please note:
Whenever you switch the answering ma-
chine on or off, you will hear an acknowl-
edgement tone.
Changing the greeting message:
If while you’re monitoring you press nu-
meric key 1 (greeting message A) or nu-
meric key 3 (greeting message B), you can
select greeting message A (Record Mes-
sages operating mode) or greeting message
B (Answer Only operating mode). The mes-
sage currently set is played back in each
case.
Note:
To end the monitoring, press numeric key
2 (Stop).