User guide

32
20BA312004/A0_en
GAP uses
Your Ascom Avena 122/Ascom Avena 122
plus supports the multi-vendor DECT GAP
protocol. To be able to register it on a for-
eign base station, it must support the GAP
protocol. The following functions are avail-
able in this connection when operating on
a first-generation Ascom Avena 122 base
station:
• internal call
• outgoing calls from the handset
• answering incoming calls
• forwarding incoming calls
• registering and de-registering the
handset
• internal calls from handset to handset
De-registering a handset from the
base station
You can de-register a handset from a base
station. To do so, set the handset to the
base station from which you want to de-
register it.
Example:
De-register the handset from base station A.
Handset switched to ON
1.
‚‚
2.
900
Key in the system PIN if required.
3. Key in the call number of the
handset you want to de-register,
e.g. 2.
4.
‚
You hear an audible acknowledge-
ment tone.
The handset connects briefly with
the base station. Handset 2 is now
de-registered.
Note:
To de-register a handset you have to be in
the vicinity of the base station.
Making calls between two
handsets
Besides the intercom feature between
handset and base station you can also make
calls between two handsets.
Handset 1 switched to ON
1.
Ë
2. Key in the internal call number,
e.g. 2.
The internal ringing tone rings on
handset 2 and the caller’s number
is displayed. The call can be
answered with the Connect key.
3. Make your call …
Note:
If an outside call comes in while an inter-
nal call is in progress, it is signalled in both
handsets with a call waiting tone. You can
send a global call from your own handset
to all the registered sets using the key se-
quence: internal, 9.
Operation with several handsets