User guide

17
20BA312004/A0_en
Answering a call
Incoming calls (outside calls, internal calls)
are signalled as follows:
Incoming outside call:
The external connection is indicated on the
handset and you hear the external ringing
tone.
On the base station the red LED flashes and
you hear the ringing tone.
fl
You answer the call ...
Incoming internal call:
The handset indicates the internal connec-
tion and the call number, e.g. 2. You hear
the internal ringing tone.
Incoming call from the base station:
The handset indicates the intercom connec-
tion. You hear the internal ringing tone.
fl
You answer the call ...
Note:
If "Offhook answering ON" is pro-
grammed, you can answer the call simply
by picking up the handset from the base
station.
The default setting is programmed to
"Offhook answering OFF".
(See page 16 for the offhook answering
settings)
Ending a call
fl
or
place the handset on the base
station.
Dialling out with the numeric
keypad
Handset switched to ON
1.
fl
You hear the dialling tone.
2. Key in the number
3. You make the call …
Note:
If the handset is registered on several base
stations, you can select the station via
which you want to make the call. If the
outside line is seized by another internal
subscriber, you will hear the internal busy
tone.
Off-line call preparation
You can key in a call number (max. 24 char-
acters) and correct if necessary.
Handset switched to ON.
1. Key in the call number.
2.
fl
Press within 15 seconds.
The call number is dialled
3. You make your call …
Note:
Off-line call preparation is also possible with
last number redial, the call register and ab-
breviated dialling.
Telephoning