User guide

14
20BA312004/A0_en
Range warning
If you activate the range warning, a warn-
ing signal will sound if you leave the radio
range in the course of a call. This could be
due, for instance, to building-related fac-
tors acting at the limit of your base sta-
tion's transmission and reception range.
If this happens, move back towards the
base station or out of the radio shadow
until this warning signal stops. If you do
not return within the base station's trans-
mitting range, the radio and telephone link
is automatically disconnected.
Deactivating the range warning
signal (default setting):
Handset switched to ON.
1.
‚‚
2.
920
3.
‚
You hear the audible acknowledge-
ment tone.
Activating the range warning signal:
Handset switched to ON.
1.
‚‚
2.
921
3.
‚
You hear the audible acknowledge-
ment tone.
Note:
If the range is insufficient, shifting the base
station can bring about an improvement.
See page 6 for information about the opti-
mum location.
Activating/deactivating the
charge check tone
When the handset is replaced correctly on
the charging bracket an audible check tone
is heard.
Deactivating the charge check tone:
Handset switched to ON
1.
‚‚
2.
950
3.
‚
You hear the audible acknowledge-
ment tone.
Activating the charge check tone:
1.
‚‚
2.
951
3.
‚
You hear the audible acknowledge-
ment tone.
Basic settings