User guide

ASCOM USER GUIDE
High Speed Base Band Modems
45
7.4 LOGGING IN
Once the “Screens Menu” is displayed (on pressing CTRL-V), choose the Password screen to
log in to the modem. This appears as follows:
The position of the cursor at the bottom of the screen is the login line. To login you must
press the SPACE key to enter edit mode.
There are four login levels, each with their own password. The login level determines which
screens may be viewed and which settings within the screen may be viewed and/or modified.
Guest Allows the user to see the present settings but change nothing
User Allows the user to see and change most settings in order to configure the unit
when installing or during normal operation.
Techie Allows the user to see additional screens and items that help with problem
solving and development.
Supervisor Allows the user to see and change everything. Only this level can see and
change the passwords for the unit.
Type the first letter of the required login level (e.g. for Supervisor type “s”) followed by a
space and then the password. Complete the entry by pressing RETURN.
The default (case-sensitive) passwords for Guest, User, Techie and Super are ‘Helen’, ‘Jennifer’,
‘Michael’ and ‘Helmut’ respectively. These should be changed when the unit is installed at the
customer’s site unless security is not an issue.
AM64/1024A V3.0
Password
Status: No Sync
Guest=
User=
Techie=
Supervisor=
[x] Use Password [x] DCD Logout
Auto-logout (mins)= 5
NOT logged in.
Logout
7
44 ASCOM USER GUIDE
High Speed Base Band Modems
7.3 USE OF CONTROLS USING TERATERM
Note: If an incorrect key has been pressed by mistake, the modem may not respond to further
keystrokes. Pressing ESCAPE usually resolves this problem.
Function Appearance Key Actions in Teraterm Alternative Action
Moving between To move directly between the screens: Return to
screens: CTRL-N to go forward. “Screens Menu” by
CTRL-P to go backwards. pressing CTRL-V and
CTRL-V to go to “Screens Menu”. select required screen
from the menu using
its associated letter.
Moving between UP ARROW (CTRL-U) to go up. TAB
items on a screen DOWN ARROW (CTRL-D) to go down.
Button Pressing the SPACE key acts as a
click action.
Check boxes [ ] SPACE key is used to toggle.
“X” indicates checked.
Radio buttons The cursor moves to the selected SPACE key
button (marked with “X”).
LEFT-ARROW moves the selection up
the choices.
RIGHT-ARROW moves the selection
down the choices.
Updown button This indicates that the value shown SPACE key
can be adjusted.
LEFT-ARROW decreases the value.
RIGHT-ARROW increases the value.
Edit Boxes To change the text, press the SPACE
key to enter edit mode.
CTRL-C clears current text.
LEFT moves cursor left.
RIGHT moves cursor right.
BACKSPACE deletes the character to
the left of the cursor.
ENTER accepts the new text.