User manual

Release 2.2 Digium, Inc. Page 36
Chapter 3: Configuration
Signalling:
pri_cpe for CPE side.
pri_net for NET side.
If you have a T1 PRI, add these lines to the following lines of the sample
file.
signalling=pri_cpe
switchtype=national
group=1
context=incoming
channel=>1-23
E1 PRI
signalling=pri_cpe
switchtype=euroisdn
context=incoming
channel=>1-15,17-31
You can also configure a channel bank of phones
signalling=fxo_ks
group=1
context=phones
channel=>1-24
E1 channel bank
signalling=fxo_ks
group=1
context=phones
channel=>1-24
Note: More detailed troubleshooting information is provided on http://
www.asterisk.org.