Product manual

System description, DECT air interface
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
57
• Portable identity: a portable is uniquely defined, by its IPUI, within the area where it has access
rights
• Fixed identity: defines the access rights of a portable to a DECT system
• Basic service: defines the type of call, e.g. normal call setup, emergency call, etc.
Outgoing call connection
Depending on system implementation the fixed part or network beyond DECT will verify the data
contained in the ‘Call control setup’ message and handle accordingly. If the result is positive the call
proceeds when the fixed radio termination sends the ‘Call control connect’ message.
Sending keypad information
The procedure involves the capability of the PT of sending keypad information related to the following
features:
• Pause (send dialling pause)
• Go to pulse (enable pulse dialling)
• Go to DTMF signalling - definite tone length
• Register recall
• Go to DTMF signalling - infinite tone length
• Internal call
• Service call
• Outgoing call and dialled digits (#, *, 0 - 9).
Fig. 40 Outgoing call
Portable radio
T ermination (PT)
Fixed radio
T ermination (FT)
Call control setup
Portable identity (IPUI [PUT , PUN] )
Fixed identity (P ARK [ARC, ARD])
Basic service (Normal call set-up)
Depending on system implementation, the
FT or the network beyond DECT will
request other type of messages like
authentication requests, etc. If they are
successful then the FT issues a `call
control connect' message
Call control connect
Sending keypad information
Multi keypad (keypad information)
026