Product manual

Upgrade from DCT1800-A to DCT1800-GAP R2A – July 1999
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
22
The CPU board has to be replaced by a new one. Cordless phones of the type DPANB 201 0x/3 are
to be replaced by GAP cordless phones. All other cordless phones and base stations can be updated
by downloading new software.
Systems using a CCS interface cannot be updated. The DCT1800-GAP system only supports LTU,
CAS and CAS+ interfaces.
Table 11 gives an overview of all items required for upgrading. To upgrade a system, it has to be taken
out of service.
Product Product number Minimum
revision
Required items Remarks
Cordless system manager,
DCT1800-GAP
LZYNB 201 05/n R3C 1 per system
Cordless system statistics,
DCT1800-GAP
LZYNB 201 06/n R3C 1 per system when statis-
tics are required
Cordless phone manager,
administrator
LZYNB 201 18/n R1B 1 per system Cordless phone main-
tenance tool. To
upgrade cordless
phones to minimum
revision R2.
Diskette IPEI numbers LZYNB 101 20/n R1 Depending on the number
of cordless phones. 1 IPEI
number per cordless
phone is required
n=1:10 IPEI numbers
n=2:30 IPEI numbers
n=3:100 IPEI numbers
B-ARI certificate EN/LZTNB 101 52/1 R1 1 per system Certificate contains a
unique B-ARI number
needed during system
initialization.
Base station software,
DCT1800-GAP
LZY/KRCNB 201/2 R1C 1 per system Diskette with base sta-
tion software for base
stations KRCNB 201.
BS330 GAP software LZY/KRCNB 301/3 R1G 1 per system Diskette with GAP soft-
ware for base stations
NTM/KRCNB 301 01.
CPU board, DCT1800-GAP 2/ROFNB 157 19/5 R1C 1 per system
CPU firmware, DCT1800-
GAP
RYT/ROFNB 157 19/3 R4A 1 per system
SPU-S board ROFNB 157 16/3 R2D 1 per ROFNB 157 08/n For replacement of old
SPU boards.
SPU-S board controller
firmware for SPU-S and
SLU boards
NTM/RYSNB 101 20 R2A 1 per ROFNB 157 16/3 or
ROFNB 157 16/1
Box with PROM
RYSNB 101 20
CLU-S board controller
firmware for CLU-S and
SLU boards
NTM/RYSNB 101 19 R2A 1 per ROFNB 157 16/2 or
ROFNB 157 16/1
Box with PROM
RYSNB 101 19
CLU DCT1800 board con-
troller firmware
NTM/RYSNB 101 44/2 R2A 1 per ROFNB 157 11 or
ROFNB 157 11/2
Box with PROM
RYSNB 101 44/2
(equal to RYT/ROFNB
157 11/2)
Table 11 Required items for upgrading a DCT1800-A to a DCT1800-GAP R2A system