Product manual

Installation instructions, Cables

Technical Product Manual - DCT1800-GAP

TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C

163

25.16 CLU/MCCB power cable – REX-CAB9013 (TSRNB 101 33)

The CLU/MCCB power cable is a 2-wire unshielded cable which is used to supply power from the

MCCB to the CLU, CLU-S and SLUs which takes care of the power distribution to the base stations.

Fig. 115 CLU/MCCB power cable – REX-CAB9013 (TSRNB 101 33)

25.17 LTU/MCCB ground cable – REX-CAB9014 (TSRNB 101 35/2)

The LTU/MCCB ground cable (see figure 116) connects the signalling earth from the PBX to all LTCs

of an LTU and can be used with all LTUs. The cable is only required when earth signalling (instead of

timed break signalling) is used.

Note:

TSRNB 101 35 is phased out. It can not be used with LTU REX-BRD9019 (ROFNB 157 25/2)

(V1)

(V0)

500

10 mm

K1 12

K2K1

096