Product manual

Installation instructions, Cables
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
160
Fig. 112 CLU/MDF cable set – REX-CAB9001 (NTM/TSRNB 101 29) (cont’d)
25.14 LTU/MDF cable set – REX-CAB9002 (NTM/TSRNB 101 31)
The LTU/MDF cable set (see figure 113) is used for the connection of the LTU to an MDF. It consists
of two shielded cables with a connector at one side. The shield of the cable is connected to the modular
cabinet by a clamp. The only difference between the two cables is the location of this clamp on the
cable. The clamp is placed on respectively 325 mm from the connector for the TSRNB 101 31/1, and
445 mm for the TSRNB 101 31/2. The clamp also functions as a pull-relief.
Revision R2 is provided with a ferrite core for EMC reasons.
The length of the cable is 5 m.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
K1 (view from cable side)
5 m ± 10 cm
K1
325 or 445 mm 50mm
093