Product manual

Installation instructions, Cables
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
156
Fig. 108 Printer cable - REX-CAB9012 (TSRNB 101 23)
25.11 CPU/MCCB serial connection cable – TSRNB 101 26
The CPU/MCCB serial connection cable (see figure 109) is used to connect the two serial
communication channels on the CPU board (for printer and PC) with the two RS232 connections on
the MCCB. This cable does not need to be ordered separately. It is factory connected to the MCCB.
Straight exit
(for printer)
90° exit
(for MCCB)
300 cm
PIN PIN SIGNALSIGNAL
TX
RX
DTR
RTS
DCD
CTS
2
3
20
4
8
5
2
3
1
8
4
7
RX
TX
DCD
CTS
DTR
RTS
GND 7 5 GND
* In some cases pin 20 and 4 on the 25 pin SUB-D connector must be
interconnected to ensure correct printer operation
*
089