Product manual

System description, Introduction
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
1
Chapter 1 Introduction
This section introduces you to the concept of DECT, the DCT1800-GAP system and its interfaces. It
contains an overview and description of network and proprietary features implemented in the radio
exchange and cordless phones. Furthermore a description of the DCT1800 system building blocks,
installation and maintenance concept and some data about the system capacity. Finally, the DECT
standard is discussed.
Chapter 1 : Introduction
Introduces you to this section
Chapter 2 : System description
Introduces the DCT1800-GAP system and its interfaces. It gives an overview of
network features and describes the implemented proprietary features for the
cordless phone. Finally it briefly describes the Computer Telephony Integration
(CTI) services.
Chapter 3 : Hardware building blocks
Describes the three building blocks of a DCT1800-GAP system; the radio
exchange, the base station and the cordless phone.
Chapter 4 : Radio exchange boards
Describes the function of the system and connection boards. It contains a block
diagram of each system board and a hardware block diagram of the DCT1800-
GAP system.
Chapter 5 : Other system aspects
Contains information about installation and maintenance, statistics, capacity and
numbering conventions.
Chapter 6 : DECT air interface
Introduces the DECT standard in a concise and comprehensible way. Topics like
the DECT application areas, technical characteristics and profiles, the operation
of the DECT radio link, TDMA frames, GAP and the security aspects in DECT
systems are covered in this chapter.