Product manual

Installation instructions, Cables

Technical Product Manual - DCT1800-GAP

TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C

153

Fig. 104 Power cable switch/fuse – TRENB 101 04

25.7 Power cable fuse/backplane – TRENB 101 05

The power cable fuse/backplane (see figure 105) is a 2-wire 2.5 mm

cable with two connectors on

both sides. It is used to supply power from the fuse holder to the backplane in the modular cabinet.

On the backplane side two piggy-back fastons are attached. Two fastons are mounted on the fuse

holder side. This cable does not need to be ordered separately. It is factory connected between the

fuse holder and the backplane.

100

± 10 mm

085