Product manual

Installation instructions, Cables
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
150
25.3 Power cable – TRENB 101 01
The power cable (see figure 101) is a 2-wire 2.5 mm
2
cable with two connectors on one side. It is
used to supply power from a transformer or an other external power supply to the filter in the modular
cabinet. The cable is provided with two faston piggy-back connectors which makes it possible to
connect another cable to this cable. The cable has a length of 2.5 m. This cable does not need to be
ordered separately. It is factory delivered with the modular cabinet.
Fig. 101 Power cable – TRENB 101 01
25.4 Power cable filter/switch – TRENB 101 02
The power cable filter/switch (see figure 102) is a 2-wire 2.5 mm
2
cable with two connectors on both
sides. It is used to supply power from the filter to the on/off switch in the modular cabinet. This cable
does not need to be ordered separately. It is factory connected to the switch.
K2
K1
2500 mm
Cap Piggy-back
Faston of other cable
082