Product manual
Installation instructions, Installation instructions BS370 Wireless Relay Station
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
94
18.5.10 Connecting the power cable
1. If it has been disconnected, connect the cable to power the base station to a power connector
(see
Figure 45 on page 78 for connector positions).
2. If it is required that the power cable enters the base station centrally from above, guide the cable
through the recess in the middle of the BS370 as shown in figure
58.
Fig. 58 Power cable entering the BS370 centrally from above
Power
cable
124