Product manual

System description, CE-marking
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
17
Chapter 7 CE-marking
7.1 General
A number of DCT1800-GAP products are CE-marked.
Products marked with the label comply with the following European Council Directives:
• 99/5/EEC, concerning Radio- and Telecommunications Terminal Equipment (RTTE)
• 73/23/EEC, concerning electrical safety
• 89/336/EEC and 92/31/EEC, concerning electromagnetic compatibility
• 93/68/EEC, concerning CE marking
Refer to the section ‘Product Specifications’ to see which products are CE-marked.
Declarations of Conformity of the products are available at the webpage: www.ascom.com
7.2 CE-marking radio exchange
The radio exchange complies with the European Council Directives 73/23/EEC and 89/336/EEC and
is marked with a
label when using modular cabinets with revision R3 or later. For CE-marking
the following restrictions are applicable:
• When using LTU REX-BRD00nn
1
(ROFNB 157 04/n
2
) use the LTU/MDF cable set REX-CAB0002
(NTM/TSRNB 101 31) with revision R2, or LTU/MDF cable set long REX-CAB0004 (NTM/TSRNB
101 44) with revision R2.
• When using a DTU all jumpers on the MCCB must be set such that the screens of both the
receiving and the transmission cables of the PBX cable are connected to ground on the MCCB
(see the section ‘Installation instructions’).
1. nn = 08, 09, 10, 11, 12 or 13
2. n = 2, 3, 4, 5, 6 or 9