Product manual

Installation instructions, Installation instructions BS370 Wireless Relay Station
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
89
To configure the BS370:
1. Install the Base Station Manager software on a PC with Windows.
2. Connect the RS232 cable with level shifter (delivered with the Base Station Manager) to the
RS232 port of the PC.
Fig. 55 Connecting PC and BS370 using the RS232 cable with level shifter
3. Connect the RS232 cable to the RJ12 service connector of the BS370.
4. Connect the cable of the power adapter (with RJ45 connector) to a power connector of the BS370.
It makes no difference which power connector is used.
5. Plug the power cable of the power adapter into a wall-outlet.
6. Check if the power LED on the BS370 is on.
7. Start the Base Station Manager Software.
8. Select menu Base Station - Connection settings and check the COM port settings.
9. Select menu Base Station - Connect to connect the PC to the base station.
Wait until connected.
10. Select Base Station - Configure Wireless Relay Station.
11. If an extra antenna will be used to communicate with the host base station: Enable 3rd antenna.
12. Give the WRS (BS370) a base station number, automatically or yourself.
Back view
121
RS232