Product manual

Installation instructions, BS330 base station
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
64
Software
If necessary, the software in the base station can be updated by downloading new software to the
base station. Downloading can be performed without disconnecting the base stations. The new
software is stored in flash memory. How to download the software is described in the help file of the
application Cordless System Manager (CSM) for Windows.
Connectors
• Two 8-pin RJ45 modular jacks for data and powering
• A 6-pin RJ12 modular jack for factory testing
The two data/powering connectors are interconnected on the board.
LEDs
LED 1 : Green power LED
LED 2 : Three colour LED, see table 1
Status of LED2 Meaning
Off Base station operational and no traffic on the base station
Green Base station operational and traffic on the base station
Red Base station is malfunctioning
Amber Base station is OK, but not available (self-test, not initial-
ized, no communication with radio exchange)
Flashing green All 8 channels are in use
Flashing amber Software is being downloaded to the base station
Table 1 Meaning of LED2