Product manual

Installation instructions, BS330 base station

Technical Product Manual - DCT1800-GAP

TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C

Chapter 16 BS330 base station

16.1 General

The base station is connected to the radio exchange by means of a standard twisted pair cable, with

minimum 26 AWG copper conductors. The base station can be fixed to a wall, a ceiling, a pole or a

beam, by means of the mounting bracket included. When fixing the base station to a wall or ceiling

the included plugs and screws must be used. When fixing it to a pole or beam a (not included) strap

a flexible metal band must be used.

Versions

The following versions of the BS330 are available:

• BS330/STD: 1880 – 1900 MHz

• BS330/CHINA: 1900 – 1920 MHz

• BS330/LA: 1910 – 1930 MHz

• BS330/US&CDA: 1920 – 1930 MHz

Contents of the box

The box in which the base station is packed contains:

• A base station

• A mounting bracket

• Two screws with wall plugs

Note:

The brand label is not included in the box, but must be ordered separately.

Power distribution

Base stations can be powered by the following sources:

• The radio exchange via the data pairs

• The radio exchange via the data and Express Powering Pairs (EPP)

• A 48 V external supply connected to the radio exchange

• A local AC-adapter

Note:

For more information about power distribution, refer to the section ‘Configuration directions’.

AC-adapter for a base station

A 24 Vdc adapter (BMLNB 101 09/n) can be used. This adapter is provided with an 8-pin RJ45 plug

that can be plugged into one of the data/power connectors of the base station.

Note:

Only approved power supply according to valid editions of EN/IEC/CSA/UL/AU/NZS 60950 is to be

used when the base station is powered by a local power supply.